Aruba Networking CX 4100i 24p 1GbE 20p Class4 POE and 4p Class6 PoE 4p SFP+ Switch
Reasons To Buy
Ruggedized Access Switch Series
The HPE Aruba Networking CX 4100i Switch Series provides IP30 Ethernet connectivity with high speed uplinks, 30W and 60W PoE, to securely extend the enterprise network and support IoT in harsh environments.
Uses the HPE Aruba Networking CX Switch Operating System (AOS-CX) for a simpler, more consistent operator experience with capabilities fit for ruggedized access.
Achieve versatile deployment with fanless 12 port DIN rail mount and 24 port 1U rack mount models with built-in 1/10 GbE uplinks and up to 360W Class 4 and Class 6 PoE.
Fully-managed enterprise class switches deliver Layer 2 capabilities with support for static routing, ACLs, robust QoS, traffic prioritization, and IPv6 support.
Simplifies ownership with no switch software licensing or subscriptions required.
AI-ready performance and power
The HPE Aruba Networking CX 4100i Switch Series is designed with ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption needed to support AI, Wi-Fi 7, and IoT requirements.
Deploy IoT devices and wireless access points in harsh environments with models that support up to 360W IEEE 802.3at Class 4 and IEEE 802.3.bt Class 6 Power over Ethernet.
Built-in wire speed 1/10 GbE uplinks remove bottlenecks at the access layer where devices connect.
Operational in extended temperatures from -40°C to 70°C using HPE Aruba Networking's industrial transceivers.
Simplified Configuration and Management
The CX 4100i series provides flexibility to manage and simplify configurations with HPE Aruba Networking Switch Multi-Edit Software, easy to use built-in web GUI, or industry standard CLI.
HPE Aruba Networking Switch Multi-Edit Software introduces automation that allows for rapid network-wide changes and verifies policy conformance post network updates.
Ready for software-defined networking with REST APIs for fine-grained programmability of network tasks.
Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance stacking.
Smarter Segmentation
The CX 4100i series supports dynamic segmentation that automatically applies and enforces user, device, and application-aware policies on wired and wireless infrastructures.
Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike.
It reduces time-consuming and error-prone task of adds, moves and changes.
Description
The HPE Aruba Networking CX 4100i Switch Series is a modern family of ruggedized Ethernet switches ideal for connecting IoT, access points, and user devices in harsh environments. Created for high performance, reliable, and secure access with enhanced security, the CX 4100i switches provide versatile deployment options for enterprise networks extending beyond carpeted areas to challenging outdoor and industrial spaces. Based on the programmable HPE Aruba Networking CX Switch Operating System (AOS-CX) used across the CX portfolio, this IP30 ruggedized series helps deliver a more consistent and efficient operator experience. This Layer 2 series has convenient built-in high speed uplinks, supports both 30W and 60W PoE, and is ready for deployment with fan less 12 port DIN mount and 24 port 1U rack mount models. With robust QoS, support for static routing, and IPv6, the CX 4100i series also simplifies ownership with no switch software licensing requirements.
What is new supporting point:
Layer 2 feature set with static routing and no switch software licensing required.
Versatile form factors with fast 1/10 GbE uplinks deliver both 30W and 60W PoE to improve IoT power.
Ruggedized Layer 2 switch series provides high performance, fully manageable, and reliable, Ethernet connectivity to IoT, access points, and user devices in harsh environments.
Management flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking Switch Multi-Edit Software.
HPE Aruba Networking Virtual Switching Framework (VSF) now available to scale up local network resources and resiliency requirements.
HPE Aruba Networking Dynamic Segmentation enables enhanced security and simplified access for users and IoT.
Specifications
| Management features |
|---|
| Switch layer |
L2 |
| Switch type |
Managed |
| Quality of Service (QoS) support |
Yes |
| Multicast support |
Yes |
| Ports & interfaces |
|---|
| SFP+ module slots quantity |
4 |
| Basic switching RJ-45 Ethernet ports quantity |
24 |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Installed SFP modules quantity |
0 |
| Installed SFP+ modules quantity |
0 |
| Console port |
RJ-45/USB Type-C |
| Network |
|---|
| Networking standards |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
| VLAN support |
Yes |
| Spanning tree protocol |
Yes |
| Port mirroring |
Yes |
| 10G support |
Yes |
| IGMP snooping |
Yes |
| Data transmission |
|---|
| MAC address table |
8192 entries |
| Switching capacity |
128 Gbit/s |
| Throughput |
95 Mpps |
| Latency (1 Gbps) |
1.585 µs |
| Latency (10 Gbps) |
1.243 µs |
| Jumbo frames support |
Yes |
| Packet buffer memory |
12.38 MB |
| Security |
|---|
| Authentication |
MAC-based authentication, Web-based authentication |
| SSH/SSL support |
Yes |
| Security algorithms |
SSH, SSH-2 |
| IGMP snooping |
Yes |
| Access Control List (ACL) |
Yes |
| Authentication type |
RADIUS, TACACS+ |
| DHCP features |
DHCP client |
| Multicast features |
|---|
| Multicast support |
Yes |
| Design |
|---|
| Rack mounting |
Yes |
| Stackable |
No |
| Product colour |
Black |
| Form factor |
1U |
| Performance |
|---|
| Processor frequency |
1016 MHz |
| Memory type |
DDR3-SDRAM |
| Internal memory |
4096 MB |
| Flash memory |
32000 MB |
| Built-in processor |
Yes |
| Processor model |
ARM Cortex-A9 |
| Stackable |
No |
| Packet buffer memory |
12.38 MB |
| Harmonized System (HS) code |
85176990 |
| Power |
|---|
| Power supply included |
No |
| AC input voltage |
100 - 240 V |
| AC input frequency |
50 - 60 Hz |
| Power consumption note |
Idle: 23W 100% Traffic Rate: 34W 100% Traffic Rate (w/ heater): 62W Note: Heater will only turn on at extreme low temperature condition. |
| Power source |
AC |
| Power supply note |
Fixed internal power supply (300W) 240W of PoE Power (no de-rating) |
| Power over Ethernet (PoE) |
|---|
| Power over Ethernet (PoE) |
Yes |
| Total Power over Ethernet (PoE) budget |
240 W |
| Other features |
|---|
| Latency |
1 Gbps: 1.585 μSec , 10 Gbps: 1.243 μSec Average Latency (LIFO-64-bytes packets) |
| Performance management |
Management flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking Switch Multi-Edit Software. |
| Memory and processor |
4 GB DDR3 32 GB eMMC Dual Core ARM Cortex A9 @ 1016 Mhz |
| Weight (imperial) |
6.47 kg (14.3 lbs) |
| I/O ports |
4 x 100M/1G Base-T Class 6 PoE ports, supporting up to 60W per port 20 x 100M/1G Base-T Class 4 PoE ports, supporting up to 30W per port 4 x 1G/10G SFP ports 1 x USB-C console port 1 x RJ45 console 1 x USB Type-A host port 1 x Alarm socket |
| Operational conditions |
|---|
| Operating temperature (T-T) |
-40 - 60 °C |
| Operating relative humidity (H-H) |
5 - 95% |
| Storage relative humidity (H-H) |
5 - 95% |
| Operating altitude |
0 - 4200 m |
| Non-operating altitude |
0 - 4600 m |
| Heat dissipation |
117 BTU/h |
| Virtual LAN features |
|---|
| VLAN support |
Yes |
| Weight & dimensions |
|---|
| Width |
444.5 mm |
| Depth |
304.4 mm |
| Height |
44 mm |
| Weight |
6.47 kg |
| Technical details |
|---|
| Harmonized System (HS) code |
85176990 |
| Logistics data |
|---|
| Harmonized System (HS) code |
85176990 |
